Guys... I believe that we should compliment and spread the word when companies do an excellent job... just as much as we do when they do a poor job!
My Bernina sewing machine (circa 1980) is a workhorse, but the foot pedal died. I'd repaired it once before, and probably could have used some epoxy and managed to fix the "plastic fatigue" again for a short while, but I discovered that an electronic switch inside it also had died... one of the spring loaded connections was no longer holding tension.
So, I started looking around. I about lost it when I discovered that Bernina brand name foot pedals are OVER $200!! Good LORD... you can buy complete sewing machines for under that! I found this site: https://www.sewingpartsonline.com/ and they had "non-brand-name" pedals for about 40% less. Still insane, but whatever. I need that machine!!
I ordered one (and found a coupon code which gave me an additional 15% off- every little bit helps!). The pedal came in less than a week.
And didn't work. Oh, I was NOT happy!!
I sent them an excruciatingly polite e-mail expressing my unhappiness, especially the fact that I was going to have to pay postage to send the POS worthless thing back, and in the meantime, I've got quilts sitting here which are NOT getting sewn.
I was shocked when I got a phone call *twenty minutes* after I sent the e-mail! They were very polite, apologetic, and said they would send a replacement out immediately, along with a pre-paid shipping label for me to send the faulty one back. I also had an e-mail with the same info the next time I checked my e-mail. These folks REALLY wanted to be sure I knew what was going on.
I got a shipment confirmation within an hour... and the pedal came TWO DAYS later. They'd sent it Express mail! And yes, this one worked! The problem with the faulty one was a slightly misaligned plug... one of the prongs was set back in just a tiny bit, so didn't make contact.
I sent them a note thanking them for their excellent service... and got a note back thanking ME for that. Apparently, (from the sounds of the note) most people simply accept the correct part, etc and don't bother expressing any appreciation.
So... if you need parts for a machine, I'd suggest you look at their site. Some of their items aren't he best price (I wouldn't buy sewing machine needles there... their prices are competitive with local sources, but I've found am online source for 100 Organ brand needles for around $13)
But their service is excellent.
Now... my mini-rant. Because I didn't have the Bernina to use, I dragged an ancient Pfaff down from the attic... it was one of the very first "commercial quality" machines sold for home use (it figures- my Mom never bought junk!). I didn't have the manual, and wanted an oiling diagram as well as a threading diagram, and basic instructions. I haven't used that machine since I was about 10 years old...
The Pfaff site was messed up- any "search" request went to an error message. So I sent them an e-mail with a request for a manual or any information they had on this (admittedly ancient machine... it has to be at least 60 years old).
Two days later, I got an email back with a PDF file linked.. the original manual for the machine. Wonderful! Boy, does it sew beautifully!
So, I sent a quick note back to them thanking them for their response. I was surprised to get a note back- again- thanking ME for thanking them. They literally said that "no one" bothers to respond when they help out.
I find that sad, but I can't say I'm surprised. I've noticed it on sites like this one... some members can ask detailed questions, and while they'll sit on a thread and argue until they turn blue, for some reason, they rarely come back to the threads where they asked for help, even just to say a simple "thanks for the answers"...
It's a minority, for sure... most members still understand the basic courtesies, and I think most have spent some time looking up answers or typing out long helpful posts, so they understand that it DOES take time and effort. But some are noticeably lacking in those basic courtesies. And I find myself just not taking the time to answer some of them. Don't get me wrong- I don't need my butt kissed, but it is nice to know whether the person who was frantically asking questions the day before bothered to read the answers several members took the time to post.
And back to the original subject- in these economic times, when companies are cutting corners and costs everywhere, if you want to be able to- for example- get a copy of an old manual for an out-of-production machine, especially if you don't want to have to pay $12 or more for a digital copy (that's what the service manual for the Bernina cost me, and while it's worth every cent, I think they should be available free from the company)... take the minute or two and THANK them when they do help you out! Believe me, the goodwill it engenders is well worth it.
Summerthyme